The URL can be used to link to this page

Home My WebLink AboutR-02-33 RESOLUTION NO. R-02-33 A RESOLUTION OF THE CITY OF SEBASTIAN, INDIAN RIVER COUNTY, FLORIDA, AUTHORIZING THE ADOPTION OF A SIGNAGE PLAN FOR THE SEBASTIAN MUNICIPAL AIRPORT; PROVIDING FOR CONFLICT; PROVIDING FOR EFFECTIVE DATE. WHEREAS, the Sebastian Municipal Airport is currently establishing developmental standards which will be adopted at a future date; WHEREAS, a signage plan has been developed to promote an aesthetically pleasing, uniform appearance for the Airport; and WHEREAS, the signage plan shall set guidelines and restrictions on future tenant signs effective upon adoption of this resolution; NOW THEREFORE, .BE IT RESOLVED BY THE COUNCIL OF THE CITY OF SEBASTIAN, as follows: Section 1. AUTHORIZATION. The Sebastian Municipal Airport is hereby authorized to implement a signage plan as documented by Exhibit "A"'attached hereto. Section 2. CONFLICTS. All resolutions.or parts of resolutions in conflict herewith are hereby repealed. Section 3. EFFECTIVE DATE. This resolution shall take effect Immediately upon its adoption. The foregoing Resolution was moved for adoption by Council member Barnes Hill The motion was seconded by Councilmember into a vote, the vote was as follows: and, upon being put Mayor Walter Barnes . Councilmember Joe Barczyk Councilmember James Hill Councilmember Edward J. Majcher, Jr. Councilmember Ray Coniglio aye aye aye aye aye The Mayor thereupon declared this Resolution duly passed and adopted this 14th day of August, 2002, CITY OF SEBASTIAN, FLORIDA By', II) \';:, J'~, ^ ,--::) '/\"J:~)h", j\},..JvrJv Mayor Walter Barnes ATTEST: Approved as to form and legality for reliance by the City of Sebastian only: /( r ':.. , ('. .~ \''-- ---- Rich S ringer, City'Atton\ey _J 2 Sebastian Municipal Airport Developmental Standards Part I: SIGNAGE PLAN 1.1 Building Signs A.) General 1.) All signage shall be designed. constructed. and located in accordance with the following design criteria and shallbe subject to the written approval of the landlord and approved by the City of Sebastian. The criterion has been established to govern the design. fabrication. and installation of single and multi-tenant signage and is intended to provide all tenants with good visual identification. B.) Procedural Requirements L) Prior to sign fabrication. Tenant shall submit. or cause to be submitted. to Landlord for approval. one (1) set of detailed drawings indicating the location. size. layout. fabrication and installation method. design. copy style and color of the proposed signage including window/door lettering and/or graphics. Drawings shall show the full fascia with architectural features of the specific finished structure. 2.) Tenant's sign contractor shall be a reputable sign fabricator. whose principal business is the fabrication of similar individual reverse illuminated channel letters, who has been in business for a minimum of three (3) years. Additionally, Tenant shall submit, or cause to be submitted; to Landlord a Certificate of Compensation Insurance of type coverage and limits as approved by the Landlord in writing. Certificate of Insurance shall name Landlord and its agents as additional insured. No work on premise may commence without a Certificate of Insurance delivered to the Landlord. 3.) Tenant shall be responsible for all required permits for their signage and the installation thereof, including, but not limited to, those by the City of Sebastian, County of Indian River, or State of Florida. In addition to those requirements listed herein. tenant must adhere to any municipal code requirements that may further restrict sign size, design, or fabrication. Revised 6/02 Page 1 of 1 4.) Fabrication and installation costs shall be at the Tenant's sole expense. 5.) Tenant shall be responsible for the maintenance and repair of its signage. If, after fifteen (15) days notification to repair the signage, no action has been taken by the Tenant, the Landlord will contract to repair or maintain the signage and the cost of repair or maintenance will be invoiced plus twenty percent (20%) for administration fees to the Tenant and will be considered additional rent for the month it occurs. C.) Design Requirements 1.) All signs are to be in the form of chamtelletter or individually reverse illuminated chamtelletter mounted with standard standoff to fascia of the building. 2.) Box signs, audible, flashing action,or other mechanical or electronic animation is not permitted. 3.) The Landlord has determined that each Tenant shall have one (1) sign per elevation. The maximum square footage of signage for a Tenant is determined by the height of the building times the length of the leased storefront at fifteen percent (15%). Example (height of building) 15' x 26' (leased store front) = 390 x 15% = 58.5 square feet. 4.) The maximum height of an individual letter is twenty-four (24) inches, Anchor! Single tenants may be allowed larger letters and secondary copy at the sole discretion of the Landlord and to any municipal code requirements by the City of Sebastian, which may further restrict size. 5.) Signage will only be allowed centered above the leased store frontage. Signs shall not face Roseland Road if tenant's property is adjacent to said road. 6.) Unless otherwise approved by the Landlord and The City of Sebastian, in writing, sign text shall contain the company name only. Elaboration of the company's products or services, slogans, or other verbiage is not allowed. 7.) No exposed wiring is allowed. Exposed raceways and exposed neon are prohibited. D.) Fabrication Specifications 1.) Letter Material Revised 6/02 Page 2 of2 a.) Letter material shall be a minimum of .040" aluminum returns painted to match face and a minimum .040" faces. Letters shall be full welded fabrication. b.) The plastic faces shall be 3/16" # 1124-IP95 texture (black/white sheet) with one-inch (I") trim cap. Trim cap and returns to be painted to match acrylic faces. c.) All reverse channel letter' s exterior surfaces must be painted Matthews (or approved equivalent) Dark Bronze (41-313). In addition, Tenant must: i.) Prepare all surfaces to receive paint by chemically cleaning ii.) Prime all surfaces to receive paint with one coat of pnmer iii.) Use only enamel paint with sprayed application in semi-gloss finish with minimum of two (2) coats d.) The reverse channel letter's interior sidewalls shall be painted white. e.) The front on the signage shall be Helvetica or block style unless Tenant has a registered corporate font in which case, Tenant must receive Landlord and City of Sebastian approval. No other alternatives or substitutions shall be allowed. 2.) Illumination a.) All illuminated signs must be a steady glow. No flashing, blinking, or strobe signs are permitted. b.) Electrical components shall be UL approved, inspected and appropriately tagged prior to installation. 3.) Transformers a.) Transformers shall be 30 milliamp b.) Transformer and sheet metal enclosures shall be UL rated and installed behind the fascia above the soffit as shown in the attached drawing. E.) Anchorl Single Tenants will be allowed to use their registered corporate logo and/or colors F.) Installation I.) All installation components such as, but not limited to, fasteners, clips, bolts, etc., shall be of non-corrosive, stainless steel, aluminum, brass, bronze or carbon bearing steel with painted finish. No black iron material of any type shall be permitted. Revised 6/02 Page 3 of3 2.) All penetrations of the fascia shall be neatly sealed in watertight manner using a single component polyurethane sealant as approved by Landlord. Tenant is responsible for fascia penetrations and damage that may result, including but not limited to, water damage. 3.) Location of all penetrations of the building fascia for conduit, sleeves, etc. shall be shown on the approved detailed drawing submitted by the Tenant. 4.) No exposed labels are permitted on the signage that is visible from the ground, except as required by local ordinance. 5.) All fasteners for the sign installation shall be concealed. The Landlord in writing shall approve the method of installation to the building fascia. 6.) Installation shall comply with all local codes and ordinances. A licensed electrician shall perform all electrical work. Signage shall have an individual circuit and be controlled by a time clock. 7.) Primary electricity to the signage is the Tenant's responsibility. G.) Insurance Requirements 1.) All sign contractors installing signs at Sebastian Municipal Airport shall be required to have a current insurance policy in force with limits of no less than one million dollars ($1,000,000.00) for Commercial Liability and Workers Compensation and Employer's Liability in Compliance with applicable legal requirements of the State of Florida. 1.2 Property Signs A.) General 1.) All signage shall be designed, constructed and located in accordance with the following design criteria and shall be subject to the written approval of the landlord and approved by the City of Sebastian. The criteria have been established to govern the design, fabrication and installation of the tenant signage and are intended to provide all tenants with good visual identification. B.) Procedural Requirements Revised 6/02 Page 4 of 4 1.) Prior to sign fabrication, Tenant shall submit, or cause to be submitted, to Landlord for approval, one (1) set of detailed drawings indicating the location, size, layout, fabrication and installation method, design, copy style and color of the proposed signage including window/door lettering and/or graphics. Drawings shall show the full fascia with architectural features of the specific demised premise. 2.) Tenant's sign contractor shall be a reputable sign fabricator, whose principal business is the fabrication of similar individual reverse illuminated channel letters, who has been in business for a minimum of three (3) years. Additionally, Tenant shall submit, or cause to be submitted; to Landlord a Certificate of Compensation Insurance of type coverage and limits as approved by the Landlord in writing. Certificate of Insurance shall name Landlord and its agents as additional insured. No work on premise may commence without a Certificate of Insurance delivered to the Landlord. 3.) Tenant shall be responsible for all required permits for their signage and the installation thereof, including, but not limited to, those by the City of Sebastian, County of Indian River, or State of Florida. In addition to those requirements listed herein, tenant must. adhere to any municipal code requirements that may further restrict sign size, design or fabrication. 4.) Fabrication and installation costs shall be at the Tenant's sole expense. 5.) Tenant shall be responsible for the maintenance and repair of its signage. If, after fifteen (15) days notification to repair the signage, no action has been taken by the Tenant, the Landlord will contract to repair or maintain the signage and the cost of repair or maintenance will be invoiced plus (20%) to the Tenant as additional rent. C.) Design Requirements 1.) All property signs are to be in the form of wood carved signs or an approved equivalent. 2.) The Landlord has determined that each Tenant shall have one (1) sign per leased property. 3.) Each sign will be located on the edge of the property line, in the middle of the property perpendicular to the street. Comer lots may angle the signage at the comer of the property to face both streets, per written approval of the Landlord. Signs will not be permitted on Roseland Road. Revised 6/02 Page 5 of5 4.) Each property sign must be eight (8) feet in length by four (4) feet in height. D.) Fabrication Requirements 1.) Approved colors: a.) All signage will be painted in approved muted earth tones. Charts of permissible colors are available in the Growth Management Department. 2.) Display Requirements: a.) All signage will only display complex, anchor, or single Tenant name and/or logo. Multiple Tenant listings on property sign are prohibited. E.) Illumination 1.) All signage shall be externally lit from the ground with low-intensity, directional light fixtures. F.) Installation 1.) Signage will be placed on a two (2) foot high base whereas total sign height cannot exceed six (6) feet above ground level. Revised 6/02 Page 6 of6