HomeMy WebLinkAboutO-22-04 Creating New Heavy Industrial DistrictORDINANCE NO.0-22-04
AMENDING CODE OF ORDINANCE SECTION 86-46 PROVIDING FOR
DEFINITIONS; AMENDING CODE OF ORDINANCE SECTION 8647
CLARIFYING UNLAWFUL DEPOSITS, EXCEPTION; AMENDING LAND
DEVELOPMENT CODE SECTION 54-24.2, FUTURE LAND USE MAP (FLUM)
DESIGNATIONS AND ZONING DISTRICTS BY PROVIDING NEW LAND
USES AND CLARIFYING ZONING DESIGNATIONS; AMENDING LAND
DEVELOPMENT CODE SECTION 54-2-5.6, INDUSTRIAL DISTRICT (IN) BY
ADDING CRITERIA FOR NEW HEAVY INDUSTRIAL, (HI) DISTRICT;
ADDING LAND DEVELOPMENT CODE SECTION 54-2-5.6A, CRITERIA FOR
HEAVY INDUSTRIAL (HI) ZONING DISTRICT; AMENDING LAND
DEVELOPMENT CODE SECTION 54-2-5.13, INDUSTRIAL PLANNED UNIT
DEVELOPMENT (PUD-I) BY ADDING CRITERIA FOR HEAVY INDUSTRIAL
(HI) DISTRICT; AMENDING LAND DEVELOPMENT CODE SECTION 54-2-
6A, PROVIDING CRITERIA FOR CONDITIONAL USE; AMENDING LAND
DEVELOPMENT CODE SECTION 54-5-22.2, ADDING DEFINITIONS;
AMENDING SECTION 54-5-22.3 ADDING LAND USE CLASSIFICATIONS;
PROVIDING FOR SEVERABILITY AND REPEAL OF LAWS IN CONFLICT;
PROVIDING FOR CODIFICATION; PROVIDING FOR SCRIVENER'S
ERRORS; AND PROVIDING FOR AN EFFECTIVE DATE.
WHEREAS, the City Council approved updates to the Comprehensive Plan 2040 in 2021; and
WHEREAS, in accordance with Florida Statutes 163.3202(1), each municipality shall adopt or
amend and enforce land development regulations that are consistent with and implement their adopted
comprehensive plan; and
WHEREAS, the City Council finds it is in the public interest to modify and update certain
provisions of the code relating to new zoning districts relating to new land uses; and
WHEREAS, the Local Planning Agency held a public hearing on March 3, 2022, and made a
recommendation to City Council to approve Ordinance 0-22-04.
NOW, THEREFORE, BE IT ORDAINED BY THE CITY COUNCIL OF THE
CITY OF SEBASTIAN, INDIAN RIVER COUNTY, FLORIDA, as follows:
Section 1. That the Code ofOrdinances and the Land Development Code, City of Sebastian,
Florida, is hereby amended as follows:
Amendment 1: ARTICLE 11I. JUNK
Sec. 8646. Definitions.
The following words, terms and phrases, when used in this article, shall have the meanings ascribed to
them in this section, except where the context clearly Indicates different meaning:
COS 4 2022
(a) "Junk" shall include, without limitation: Old and dilapidated motor vehicles, trailers, boats or other
vessels and parts thereof, household appliances, scrap, building material, scrap contractor's
equipment, tanks, casks, cans barrels, boxes, drums, piping, bottles, glass, old iron, machinery, rags,
paper, excelsior, mattresses, beds, bedding, or any other kind of waste material. A motorvehicle shall
be deemed to be a motor vehicle which is incapable of locomotion under its own power, or which can
no longer be used for the purpose for which it was originally manufactured. A motor vehicle which
has been substantially wrecked or demolished as a result of a collision or upset shall be deemed to
become a junk if it becomes impracticable to repair because of financial reasons or otherwise and if it
shall remain without repair for a period of 30 days after the collision or upset which substantially
wrecked or demolished the motor vehicle.
(b) "Open-air storage" shall mean an area other than in a structure enclosed by four walls and a roof,
such as a garage or utility shed, that conceals It from public view shall be deemed to be open-air
storage. Placement of an article under a carport or on a porch that is not so enclosed shall be
considered open-air storage.
(c) "Recyclable materials" shall include waste materials that can be used to manufacture a new product
or reuse of the material for a similar or original purpose or waste that can be converted into reusable
material. Specifically prohibits "Junk" as defined in (a) except for the following: motor vehicles,
trailers, household appliances, scrap metals, tanks, casks, cans, barrels, boxes, drums, piping, bottles,
glass, old Iron, paper, or any other kind of common household Items.
Sec. 86-47. Unlawful deposits, exception.
It shall be unlawful to deposit, store, or maintain, or to permit to be deposited, stored, or maintained junk
as defined in section 86-46 of this Code, in open-air storage except as permitted in the applicable zoning
districts. The temporary deposit of junk or recycling in a location authorized for waste collection is exempted
from this section.
Amendment 2: ARTICLE IV. LAND USE COMPATIBILITY
Sec. 54-2-4.2. - Future land use map (FLUM) designations and zoning districts.
Table 54-2-4.2"Future Land Use Map (FLUM) Designations and Compatible Zoning Districts" references
adopted FLUM designations contained in the land use element of the City of Sebastian Comprehensive Plan
and identifies corresponding zoning districts which are hereby established in order to implement the FLUM
designations, respectively.
TABLE 54-2-4.21't
FUTURE LAND USE MAP DESIGNATIONS AND
COMPATIBLE ZONING DISTRICTS
Comprehensive Plan (Corresponding compatible Zoning Distrtcn;
Future Land Use Map Designation
Conservation I C: I Conservation
COS 4 2022
VLD Very Low Density Residential RE-40:
Residential
Estate
RS-20:
Single -Family Residential
RS-10:
Single -Family
Residential
PUD-R:
Residential Planned Unit Development
LDR Low Density Residential RS-20:
RS-10:
Single -Family
Residential
PUD(R):
Single -Family
Residential
Residential Planned Unit Development
MDR Medium Density Residential RM-8: Medium Density Multiple -Family Residential
RM-10: Medium Density Multiple -Family Residential
PUD(R): Residential Planned Unit Development
MH
Mobile Home Subdivisions
R-MH:
Mobile Home Subdivisions
PUD-MH
Mobile Home Planned Unit Development
C-512
Commercial CR-512 Corridor
C-512:
C-512 Commercial District
CL
Limited Commercial
CL:
Commercial Limited
PUD(C):
Commercial Planned Unit Development
CG
General Commercial
CG:
Commercial
General
PUD(C):
Commercial Planned Unit Development
MU:
Mixed Use
RMU
Riverfront Mixed Use
CR:
Commercial
Riverfront
CWR:
Commercial Waterfront
Residential
RM-8:
Medium Density Multiple -Family
Residential
PUD(R):
Residential Planned Unit
Development
PUD(C):
Commercial Planned Unit Development
MU:
Mixed Use
MU
Mixed Use
MU:
Mixed Use
CG:
Commercial
General
PUD(C):
Commercial Planned Unit Development
RM-8:
Medium Density Multiple -Family
Residential
RM-10:
Medium Density Multiple -Family
Residential
PUD(R):
Residential Planned Unit Development
CL:
Commercial Limited
• IN:
Limited Industrial
PUD(I):
Industrial Planned Unit Development
IN
Industrial
IN:
Limited
Industrial
Al
Airport and Industrial
Facilities
PUD(I);
Industrial Planned Unit Development
HI
Heavy Industrial
IN:
Limited Industrial
HI:
Heavy Industrial
PUD(I)
Industrial Planned Unit Development
COS 4 2022
INS Institutional PS: I Public Service
CON: Conservation
NOTE:(1) Manufactured housing is permitted in all residential districts within the city if the units comply with the
following standards:
1. City's adopted building code;
2. State mandated criteria governing construction in coastal areas;
3. State of Florida buildings standards of F.S. chapters 320 and 553; and
4. U.S. Department of Housing and Urban Development Manufactured Home Construction and Safety Standards
of 1974 (i.e., F.S. 3 320.823)
The official zoning map may correct drafting and clerical errors or omissions in the prior official zoning map, but
no such corrections shall have the effect of amending the code or any subsequent amendment thereto without
duly noticed public hearings as provided herein. When any official zoning map is replaced, the prior map or any
significant parts thereof remaining shall be preserved together with all available records pertaining to Its
adoption and amendment.
•+apt.+
Amendment 3: ARTICLE V. ZONING DISTRICT REGULATIONS
Sec. 54-2-5.6. Industrial District (IN).
(a) Intent. The intent of the IN District is to provide a management framework for implementing
comprehensive plan objectives and policies for limited industrial development on land designated IN on
the future land use map. All development in the IN District shall comply with the comprehensive plan,
performance criteria in chapter III, as well as other applicable land development regulations. Salvage yards
and junkyards are deemed to generate highly extensive adverse impacts for the urban area and shall not
be permitted uses in the city limits of Sebastian within the IN district. Such activities are more
appropriately located within the HI district (Sec 54-2-5.7) and PUD (I) district (Sec 54-2-5.13).
(b) Permitted uses:
Utilities, public and private
Business and professional offices with or without drive -through facilities
Gasoline sales
Crematory
Commercial retail with 6 5,000 sq. ft.
Pharmacies
Medical marijuana dispensaries
Commercial amusements, enclosed
Storage facilities
Plant nurseries
COS 4 2022
Restaurants with or without drive -through facilities
Trades and skilled services, including marine -related
Wholesale trades and services
Farmer's market
Fish markets and packing facilities
Veterinary services
Industrial activities
Parking garages
Parking lots without buildings an the lot
Clubs and lodges, public and private
Schools, public and private
Educational Institutions, marine related
Administrative services, public and private
Vehicular sales and related services
Accessory watchman or custodian facilities
Medical services
Vehicular services and maintenance
Marine power sales and service
Wet/dry storage of boats
Accessory uses to permitted uses
(c) Conditional uses:
Commercial retail with> 5,000 sq. ft.
Hotels and motels
Mini -storage
Protective and emergency services, public
Parks and recreation, public
Commercial amusements, unenclosed
Adult entertainment establishment
Flea markets
Accessory uses to conditional uses
(d) Dimensional regulations:
(1) Maximum FAR: 50%.
(2) Maximum height: 35 feet.
COS 4 2022
No structure shall be erected within the approach zones of active runways on the Sebastian Municipal
Airport at a height in excess of those permitted by the FAA or the city council. All structures shall
comply with the Cityof Sebastian Airport Master Plan.
(3) Lot coverage:
Maximum building coverage: 50%.
Maximum Impervious surface: 80%.
Minimum open space: 20%.
(4) Lot dimensions:
Minimum lot size: 15,000 square feet.
Minimum width: 100 feet.
Minimum depth: 125 feet.
(5) Minimum setbacks:
Front yard: 20 feet.
Side Interior yard: None.
Rear yard: 10 feet.
No building or structure in an IN District shall be located closer than 30 feet to a residential district.
(6) Separation requirements:
• Pharmacies and medical marijuana treatment centers shall not be located closer than 500 feet
from any public school, charter school, private school, daycare or childcare facility.
• Pharmacies and medical marijuana treatment centers shall not be located closer than 500 feet
from any church, playground, public recreational facility or community center.
• Pharmacies and medical marijuana treatment centers shall not be located closer than 500 feet
from another pharmacy or medical marijuana treatment center, and only one such business
shall be located any single shopping center.
(e) Processing and storage within the Industrial District: In the Industrial District any use is permitted either
Indoors or outdoors, but in conformance with the applicable performance standards. In the Industrial
District, all business, servicing, manufacturing or processing within 200 feet of a residential district
boundary may be outdoors but shall be effectively screened by a solid wall, fence or natural landscaping
providing a 90 percent opaque screen planting so that the materials shall not be visible from the residential
district. The requirement shall not apply to airfields for the outside storage of aircraft.
54-2-5.6A Heavy Industrial (HI)
(a) Intent. The Heavy Industrial (HI) district also serves as the City's heavy industrial development
area and is intended to permit Industrial and manufacturing establishments of varying size, scale
and types, limited commercial and office/medical uses necessary for the vitality of the district
may also be provided.
(b) Permitted Uses shall be per the IN district, Sec. 54-2-5.6.(b).
COS 4 2022
(c) Conditional Uses shall be per the IN district, Sec. 54-2-5.6.(c) with the following additional uses:
Recycling and materials recovery facility
(d) All Heavy Industrial Uses shall be reviewed using the Conditional Use findings provided in Sec. 54-2-6.2 at
time of site plan review and planning and zoning commission hearing.
(e) Dimensional regulations:
(1) Maximum FAR: 50%.
(2) Maximum height: 35 feet, see also additional limitations per Section 54-2-7.12 Airport height
limitations
(3) Lot coverage:
Maximum building coverage: 6091.
Maximum Impervious surface: 80%.
Minimum open space: 20%.
(4) Lot dimensions:
Minimum lot size shall be 5 acres.
Minimum width: 200 feet.
(5) Minimum setbacks:
Front yard: 50 feet.
Side interior yard: 25 feet.
Rear yard: 50 feet.
No building or structure shall be located within 100 feet of a residential district.
(f) Outdoor Storage, Secondary Containment, and Open Air Storage
(1) All outdoor storage shall include secondary containment meeting minimum standards for open-air
storage facilities and industry standards.
(2) Screening and buffering to prevent any adverse impacts on adjacent lands and residential areas shall
be in conformance with standards established in section 54-3-14.16(c)(1).
(3) All outdoor business, servicing, manufacturing or processing, including the storage or parking of
vehicles or vehicles for recycling or semi -trucks and trailers (for no longer than two business days) and
shall be effectively screened by a solid wall, fence or natural landscaping providing a 90 percent
opaque screen planting so that the materials shall not be visible from the residential district and shall
be located at least 50 feet from a public or private right-of-way and at least 100 feet from any abutting
residential use or residentially zoned district.
(4) Any outdoor storage shall not be located within 100 feet of the boundaries of the property or within
200 feet of any watercourse, waterbody, or wetland.
(5) In addition, outdoor storage is not permitted in any required street (front) or side yards (No outdoor
storage shall be allowed in street yards or otherwise forward of the front building line).
(6) All outdoor storage shall be screened from view from the public right-of-way, public parking areas, or
adjacent residential development by an opaque wall or fence a minimum of eight feet in height.
COS 4 2022
(7) All outdoor storage, secondary containment, or open air storage shall employ pollution prevention
best management practices (BMPs) to minimize the risk of stormwater exposure and the potential for
pollutant transport to any on -site stormwater management system, to the Municipal Separate Storm
Sewer System (M54), or to surface waters of the state. An annual M54 small site Industrial generator
report Is required to be submitted to the state. The industrial site's National Pollutant Discharge and
Elimination System (NPDES) permit, as required and regulated by the Florida Department of
Environmental Protection (FDEP), shall be established and maintained according to the requirements
of FDEP. The site's most current FDEP approved post -development stormwater pollution prevention
plan (SWPPP) or LIMP Plan shall be submitted to the City Planning Department.
(8) All outdoor storage, secondary containment, or open air storage shall employ pollution prevention
best management practices (BMPs) in accordance with industry standards for managing emission of
noise, air pollutants, odor, vibration, fire, or explosive hazard and glare.
Sec. 54-2-5.13. Industrial Planned Unit Development (PUD-1).
(a) Intent. The objective of this zoning district is to establish regulatory standards for controlling the location of
comprehensively planned Industrial development located In areas removed from residential areas and
accessible to arterial roadways. The PUD(I) is Intended to Incorporate a flexible management policy, which
fosters Innovative master planning in the design and development of large scale industrial areas. The
PUD(I) District provides for industrial land uses and accessory sales and service activities and promotes high
standards of land planning and site design.
(b) Compliance with comprehensive plan and future land use map. All industrial PUD's must comply with the
provisions of the Sebastian Comprehensive Plan. In addition to meeting the performance criteria set forth
in this section, all land contained within an industrial PUD must have an "Industrial" comprehensive land
use map designation.
(c) Location and size. An Industrial PUD shall have frontage on a primary arterial roadway, as designated on
the City of Sebastian Major Thoroughfare Plan. At the time a PUD(I) application is submitted and approved
by the city the land included In the PUD(I) application shall have a minimum of 25 contiguous acres and
shall be under unified control as required pursuant to section 54-4-20.1(b).
(d) land use mix. The specific land use mix within a PUD(I) District development shall be determined by the
underlying comprehensive plan future land use map designation. The location of the various land uses shall
be determined during the review of the preliminary development plan required pursuant to section 54-4-
20.3.
(a) Permitted uses. Permitted uses shall Include those land use activities cited below which are determined to
be consistent with the underlying comprehensive plan future land use map designation and shall be
permitted by right within an approved PUD(I) development plan.
(1) Uses as permitted in section 54-2-5.6 or 54-2-5.6A.
(f) Conditional uses. Conditional uses shall Include those land use activities as defined in section 54-2-5.6 or
54-2-5.6A and are; (1) consistent with the comprehensive plan future land use map designation; and (2)
comply with all requirements and conditional use criteria provided In this ordinance and In other applicable
laws and ordinances. The planning and zoning commission shall determine if such conditions and
provisions are satisfied. All conditional uses allowed within an industrial (IN) or heavy industrial (HI) zoning
district may be permitted within the corresponding comprehensive plan land use map designation
provided that all conditional use criteria of article VI are satisfied.
COS 4 2022
(g) Perimeter transition area. All uses shall conform to the purposes of the Industrial Planned Unit
Development District and shall be compatible with all uses, existing or proposed in the vicinity of the area
covered by the proposed planned development.
(1) Compatibility with adjacent residential property. No structure proposed for industrial use shall be
constructed within 100 feet of that part of the perimeter property line adjacent to property zoned for
residential development.
(2) Compatibility with adjacent nonresidential property. In those cases where the perimeter line does not
abut an existing residential development or residentially zoned land, the minimum setback shall be
determined as part of the preliminary development plan review. No building shall be looted within
40 feet of the outer boundary of the PUD district, excepting entryway security buildings and
structures approved by the city council.
(h) Size and dimension regulations. The intent of the PUD(I) is to offer greater flexibility In the design of
innovative large sole development and to accommodate amenities generally not found in conventional
development. The lootion, size, dimensions, and design of yards, building setbacks, points of vehicular
access, parking areas, building characteristics, and all other planned site improvements shall provide for.
• Safe and convenient Internal vehicular circulation, including access and sufficient area for effective
delivery of emergency services such as fire protection;
• Buildings with safe entry and exit from the front and the rear of respective buildings; and
• Convenient, well landscaped and designed pedestrian ways and open space systems.
All such planned site improvements shall be governed by the following:
(1) Minimum size and dimension of Industrial site improvements.
a. Minimum lot size. No individual minimum lot size shall be required within an Industrial Planned
Unit Development.
b. Floor area ratio(FAR). The FAR shall not exceed 50% and shall comply with Sec. 54-2-5.6(d) and
Sec. 54-2-5.7(e) provisions governing FAR in industrial districts.
C. Frontage requirements. All land use activities within a PUD(I) shall have access to a public street.
d. Setback and yard requirements. There are no required setbacks or yards within the Industrial
Planned Unit Development except as otherwise provided for herein.
e. Distance between buildings. There shall be a minimum of 20 feet separating buildings, excepting
buildings with Immediately adjoining or common walls. However, the minimum distance
separating one building over 25 feet In height from an adjacent building shall be 20 feet plus one
foot for each additional two feet in height above 25 feet.
f. Height. The height of structures shall not exceed 35 feet.
g. Open space. The development shall maintain no less than 25% percent open space. Higher
standards may be required for conditional uses, which demonstrate consistency with standards
for open space and green space for such uses within this Code.
(2) General criteria for reviewing size and dimension standards. See section 54-4-20.1 for specific criteria
to be applied in assessing density, intensity, and other size and dimension requirements for site
specific development proposals.
COS 4 2022
(1) Screening and buffer yard requirements. See article XIV for specific criteria to be applied in assessing the
required screening and buffer yard requirements.
(j) Subdivision improvements and urban design amenities. In addition to the requirements of article XIX of this
Code as well as open space systems and street furniture, subdivision Improvements and urban design
amenities shall reflect principles and practices of urban design, Including streetsrape amenities which
promote a harmonious and aesthetic environment for pedestrians and other user groups within the
proposed development. This requirement shall be enforced in order to implement the purpose and Intent
of the PUD(I) and section 54-4-20.1.
Amendment 4: ARTICLE VI. CONDITIONAL USE CRITERIA
Sec. 54-2-6.4. Specific criteria for approving a conditional use.
In addition to satisfaction of the general provisions cited above, a conditional use shall be permitted only upon a
finding that the proposed conditional use complies with the requirements for the respective conditional use as
specified below:
(3613) Recycling or materials recoveryfacilities:
a. Applicable zoning districts. Recycling or materials recovery facilities shall be permitted as a
conditional use within the following zoning districts: HI.
b. Conditional use criteria. Recycling or materials recovery facilities will be allowed provided the
following conditions are met:
1. A site plan meeting all the requirements of Article X and Article XVIII. including an
operational plan describing the type of materials accepted, the method of screening,
handling, storing, disposing, marketing, and turnover of stored/stockpiled material, and
means of complying with applicable environmental regulations.
2. No materials shall be buried or burned on site, and no tires or hazardous materials shall be
stockpiled on site.
3. All operations shall be conducted entirely within an enclosed building and no portion of
the site may be used for outside storage greater than two business days.
4. Outside storage (no greater than two business days) may be approved by the planning and
zoning commission if sufficient land area and secondary containment is provided together
with screening and buffering to prevent any adverse impacts on adjacent lands and
residential areas as noted in conditions 5, 6, and 7 below. Secondary containment must
meet minimum standards for open-air storage facilities.
S. No building shall be located closer than 100 feet to any property line abutting a residential
district.
6. There shall be a minimum lot size of 5 acres.
7. Screening: All side and rear yards between the recycling facility and adjacent properties
having a non-commercial use or non-commercial land use designation shall be screened in
accordance with the standards established In section 54-3-14.16(c)(1).
COS 4 2022
rrrrrr
Amendment 5: ARTICLE XXIL LANGUAGE AND DEFINITIONS
Sec. 545-2L2. Definition of terms.
Terms not otherwise defined herein shall be Interpreted first by reference to the comprehensive plan and this
code; secondly, by reference to generally accepted engineering, planning, or other professional terminology if
technical; and otherwise according to common usage, unless the context clearly indicates otherwise.
For the purpose of enforcing and administering this code, the following words shall have the definition and
meanings herein ascribed:
Recreational vehicle (RV). Any travel trailer, camper, boat, or trailer as defined herein. Additionally, any
portable vehicular structure that is built on a chassis, which Is designed as a temporary dwelling for travel and
recreation, and which has a transportable body width not exceeding eight feet and a length not exceeding 40
feet.
Recycling. Any process, including composting and mulching, in which solid waste, or materials which would
otherwise become solid waste, are collected, separated, processed and reused or returned to use in the form of
raw materials or products.
Recycling or materials recoveryfacilities. Operating facilities for separating and sorting recyclable materials
from nonhazardous waste streams. Operations shall be conducted inside a building and temporarily (not greater
than 48 hours) stored outside prior to delivery to a permanent site for reuse and or processing into new
products.
Sec. 54-5-22.3. Land use classifications.
The purpose of these provisions Is to classify uses Into specially defined types on the basis of common functional
characteristics and land use compatibility. These provisions apply throughout the zoning regulations. All land use
activities are classified Into the following activity types. This section shall not be considered an all -Inclusive list of
all permitted and/or conditional uses contained within the land development regulations.
(it) Industrial activities. The following compatible land uses shall be considered industrial activities:
(1) Warehousing, storage and wholesaling within enclosed buildings; also includes distribution
(freight movement).
(2) Mechanical repair and service, including but not limited to, machine shops and vehicular repair,
service and maintenance.
(3) Light manufacturing including skilled trades and services, light processing of woods, synthetics,
and metal fabrication, assembly and distribution functions, electronics„ and similar uses.
(4) Building materials supply and storage, and contractor trade units (with offices).
(5) Accessory uses to those described above.
(6) Outdoor and open air storage in accordance with Sec. 86-46(b).
(7) Research and development, with or without manufacturing.
COS 4 2022
Section 2. Severability. In the event a court of competent jurisdiction shall determine that
any part of this Ordinance is invalid, the remainder of the Ordinance shall not be affected and it shall be
presumed that the City Council of the City of Sebastian did not intend to enact such invalid provision. It
shall further be assumed that the City Council would have enacted the remainder of this Ordinance
without said invalid provision, thereby causing said remainder to remain in full force and effect.
Section 3. Repeal of Laws in Conflict. All ordinances or parts of ordinances in conflict
herewith are hereby repealed to the extent of such conflict.
Section 4. Codification. The sections of the ordinance shall be codified within part of the
City Land Development Code and may be renumbered or re -lettered to accomplish such, and the
word "ordinance" may be changed to "section," "division," or any other appropriate word.
Section 5. Scrivener's Errors. Sections of this ordinance may be renumbered or re -lettered
and corections of typographical errors which do not affect the intent may be authorized by the City
Manager, or the City Manager's designee, without need of public hearing, by filing a corrected or re -
codified copy of same with the City Clerk.
Section 6. Effective Date. This Ordinance shall become effective immediately upon its
adoption by the City Council.
The foregoing Ordinance was moved for adoption by Councilmember Dodd . The
motion was seconded by Councilmember Janes and, upon being put to a vote, the vote
was as follows:
Mayor Jim Hill
aye
Vice -Mayor Fred Jones
aye
Councilmember Ed Dodd
aye
Councilmember Bob McPartlan
aye
Councilmember Christopher Nunn
ave
The Mayor thereupon declared this Ordinance duly passed and adopted this 25th day of
May 2022.
CITY OF SEB', FLORIDA
By:
JI Hl L,MAYOR
ATTEST: -
COS 42022 -
ANETTE WILLIAMS, MMC
CITY CLERK Approved as to form and legality for
reliance the of eb only.
NON, J SQ.
CITY ATTORNEY
COS 4 2022